The blue button switches to digital mode, the red button switches to analog mode and the black button switches to serial mode.Pentair intellicenter app for pc The following items are included in the Pentair IntelliCenter 5PS Control System kit: Pentair IntelliCenter Control System Outdoor Control Panel (mounted in the load center) Pentair IntelliCenter Control System Load Center. These are buttons that allow you to switch between different signal types for the touch panel. Notice how there are three buttons at the top left of the Crestron CT-1550 touchpanel symbol. When the button connected (through a digital press join) is pressed, this point will go high. The signal points on the right side of the touch panel symbol are outputs. Anytime the signal on one of these points go high or low (on a digital feedback point), the button connected to it (through a digital press join) will appear pressed (high) or not pressed (low). The signal points on the left side of the symbol are feedback inputs. The expanded symbol will appear in the Detail View panel. This must be the same as the the number programmed into the touch panel or your CP2E controller will not be able to talk to the CT-1550 touch panel.ĭouble click on the icon for the Touch panel. Since you only have the Crestron CT-1550 touch panel installed, that is all you will see.
A list of all of the Crestnet devices for this project will appear. Double click on the folder labelled Slot01: Crestnet :C2Net-Device.
Of the CP2E controller that you installed when you configured the hardware for this project.įirst, we will program the signals for the CT-1550 touchpanel. These sub folders represent the inputs and outputs In programming mode go to the Program View Panel and open the Central Control Modules: CP2E folder. We are now going to start programming the file that will be uploaded to your Crestron CP2E controller. Crestron Tutorial: Opening Your First Crestron SIMPL Windows Symbol
0 kommentar(er)
